Glass wall card reader
GMR3-61/W

Glass wall card reader
6 buttons

EAN: 8595188155793 | Code: 5579 standard (white)
EAN: 8595188155854 | Code: 5585 standard (black)

DESCRIPTION

  • Wall RFID card reader GMR3-61 is designed for reading of contactless media (chip cards, key fobs, tags, etc.), which are used for controlling access to buildings or parts of buildings.
  • With the glass controller GMR3-61 users will appreciate the elegant design and the easy of control using six touch buttons, which can be assigned diff erent control functions lighting, shading, scenes, heating, etc.
  • GMR3-61 a design element of the (control) system iNELS and is available in black (GMR3-61/B) and white (GMR3-61/W) variants.
  • GMR3-61 reader can be used to control the security system (locking / unlocking) access system (opening doors, gates, etc.) or appliances (based on assigned rights).
  • GMR3-61 supports RFID media with the carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K, Plus S 4K.
  • The GMR3-61 is also equipped with 8A relay output with changeover contact AgSnO2, which can be switched directly by reader (or by any controller in the system).
  • Between each pair of touch keys is a pair of indicator LEDs (Green, Red) to indicate the status of the controlled appliance, or the state of any sensor or actuator in the system.
  • Located on each touch button is a blue LED indicator, signalling the touch of a button. Touching may also be signalled by a vibrating pulse or audible tone - optionally in the software iDM3.
  • All variants of GMR3-61 are available in sizes of luxury controllers LOGUS90 (94 x 94 mm).
  • GMR3-61 reader is equipped with a sensor of ambient light intensity. Based on information from the sensor can switch the orientation of blue LEDs on the touch-pad GSB3 or perform various actions with the software iDM3, eg. To control the lighting circuits in the corridor and others.
  • GMR3-61 cannot be installed into multiple frames they are designed for mounting into installation boxes.

TECHNICAL PARAMETERS

  • Number of buttons: 6
  • Supply voltage: BUS 27 V DC
  • Rated current from BUS: 50 mA (at 27 V DC)
  • Internal temp. sensor: Yes
  • Inputs: -
  • Dimensions: 94 x 94 x 36 mm

Downloads

Wichtige Kontaktpersonen

Bestellungen

+49 (0) 221 222 837 80
elko@elkoep.de

Technische Unterstützung

+49 (0) 221 222 837 80
krejci@elkoep.de