Join to our online upcoming free webinars...

Glass card reader GCR3-11

EAN: 8595188157483 | Code: 5748 standard (white)
EAN: 8595188157476 | Code: 5747 standard (black)

DESCRIPTION

  • Glass RFID card reader GCR3-11 is part of a comprehensive range of glass iNELS control units and can be advantageously used in all projects, e.g. guest room management system (GRMS).
  • GCR3-11 card reader is designed for reading smart cards, which are intended to enter the hotel room or any other part of the building.
  • GCR3-11 supports RFID media with a carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K (EV1).
  • The GCR3-11 is a design component of the iNELS system and is available in elegant black (GCR3-11/B) and white (GCR3-11/ W) variants.
  • The input card reader is the first device of the guest room management system (GRMS), with which the hotel guest comes into contact first and therefore was designed with an emphasis on representative design.
  • Engraving of symbols is possible upon a request. The room number as well as the logo of the hotel can be also engraved on each component.
  • The controller is also equipped with touch button with the function of the bell and with two icons to indicate the status of guest requests, e.g. “Do Not Disturb" and "Make Up Room", whose state guest can set from multifunction touch panel EHT3, glass card holder GCH3-31, glass switch buttons GSB3-20/S, GSB3-40/S, GSB3-60/S or such GSP3-100 glass switch panel.
  • Individual symbols can be illuminated in one of seven colours - red, green, blue, yellow, pink, turquoise and white.
  • Reader GCR3-11 is equipped with an 8 A relay output with AgSnO2 contact for door lock control.
  • Reader GCR3-11 is equipped with a sensor for ambient light intensity. Based on information from the sensor it can e.g. switch the lighting circuits in the corridor. 
  • All versions are in the size of the module (94x94 mm) from the line of luxury switches and sockets LOGUS90 and are therefore fully in line with the design of frames for the sockets of this series, where you can just as for the controllers choose white and black glass frames.
  • GCR3-11 are designed for mounting into an installation box.

TECHNICAL PARAMETERS

  • Number of buttons: 3
  • Supply voltage: BUS 27 V DC
  • Rated current from BUS: 100-130 mA (at 27 V DC)
  • Inputs: internal temperature and brigtness sensor
  • Dimensions: 94 x 94 x 36 mm

Downloads

Customer Centre

Helpline

+420 800 100 671

Technical support

support@elkoep.com