Join to our online upcoming free webinars...

Dimmer Actuator, 6-channel DA3-66M

EAN: 8595188182065 | Code: 8206 standard

DESCRIPTION

  • DA3-66M is a universal dimming 6-channel actuator, which is used to control the brightness of dimmable light sources such as ESL, LED and RLC with 230 V power supply.
  • The DA3-66M has 6 semiconductor-controlled 230 V AC outputs. The maximum possible load is 150 VA for each channel.
  • The individual outputs of the dimmer can be connected in parallel and thus increase the maximum output load at the expense of the number of outputs.
  • Each output channel is independently controllable and addressable.
  • By setting min. brightness, the flickering of different types of light sources is eliminated.
  • Min. brightness and type of load are performed using SW IDM.
  • Use the control buttons on the front panel to manually control the output.
  • The actuator is equipped with electronic overcurrent and thermal protection, which switches off the output in case of overload, short circuit, or overheating.
  • The dimmer has 6 galvanically separated inputs which can be used both to control the dimmer and as a binary input to the INELS system.
  • The device supply (potential L) must be protected with a safety device corresponding to the power input of the connected load, e.g. with a quick-release fuse.
  • During installation, it is necessary to leave at least half a module of free space on each side of the actuator for better cooling.
  • DA3-66M is in 6-MODULE version and is intended for mounting in a switchboard on DIN rail EN60715

TECHNICAL PARAMETERS

  • Output: R - L - C - LED - ESL; 150 VA (230 V) / 75 VA (120 V)
  • Input: 6x wire buttons
  • Input voltage: 20-230 V AC (50-60Hz) /DC
  • Rated current from BUS: 100 mA (at 27 V DC)
  • Housing: 6-MODULE
  • Dimensions: 90 x 105 x 65 mm

Downloads

Customer Centre

Helpline

+420 800 100 671

Technical support

support@elkoep.com